打印层厚度对FDM薄板固有特性的影响

针对不同打印层厚度对熔融沉积成型(fused deposition modeling,简称FDM)薄板固有特性的影响规律及相应的机理进行了研究。首先,以悬臂边界条件下的FDM薄板为研究对象,创建了固有特性理论模型;其次,完成了薄板样件的制备,同时搭建了样件的动力学测试系统,实验研究了样件的固有特性参数;最后,对比分析理论与实验结果,以验证理论模型的正确性。研究结果表明,所建模型可以准确预测FDM薄板结构的固有特征参数;打印层越厚,样件的固有频率越高,但其模态振型不会随着打印层厚度的变化而变化。该研究为提高FDM产品动力学性能提供了理论基础和技术支持。     

Effect of Temperature and Strain Rate on the Hot Deformation Behaviour of Ferritic Stainless Steel

Metals and Materials International - The flow behaviour and microstructure characteristics of a ferritic stainless steel were investigated using plain strain compression test on a Gleeble 3500...     

Up-pulling force analysis for ESC hollow cylindrical casting

Electroslag casting(ESC)is an important method to produce high quality castings.In this study,the ESC up-pulling inner mold method(EUPIM)was used to produce hollow cylindrical castings with the multiple consumable electrodes.The radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell were analyzed using the finite element method(FEM)with the aid of ANSYS software.The ProCAST software was used to calculate the specific heat,heat conductivity and density curve of Cu.Simulation results show that the radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell near the slag-metal interface of hollow cylndrical casting gradually increase from 0 s to 360 s after the ESC starting(slagging)process but before applying the up-pulling force.The suitable initial up-pulling moment of the inner mold is at around 180-198 s after the starting process.     

摆杆式导叶调节机构的设计与研究

为促进变几何涡轮在航空发动机中的广泛应用,提高变几何涡轮的工作效率,设计了一种用于变几何涡轮的摆杆式导叶调节机构。采用Adams软件对导叶调节机构进行了运动学仿真研究,仿真结果验证了调节机构设计的可行性,通过仿真发现这样的导叶调节机构至少需采用3个作动筒同时驱动才能保证涡轮调节的精度要求。在Adams中对机构进行了参数化建模,利用参数化模型分析了尺寸误差和间隙对导叶转动精度的影响,并且以前十次仿真为例计算了调节机构导叶角度重复位置精度的可靠度。研究结果表明设计的导叶调节机构结构合理、可靠性高。     

热轧双相钢生产现状、存在问题及发展趋势浅析

介绍了国内外热轧双相钢的发展现状；对热轧双相钢的成分体系和关键生产工艺进行了总结，指出了目前热轧双相钢在生产过程中存在的问题；提出了未来热轧双相钢的主要发展方向为低成本、高强度、低负荷、高表面质量和“以热代冷”。     

直流电对7B04铝合金固溶与时效组织和性能的影响

本文采用拉伸试验、扫描电子显微镜(SEM)和透射电子显微镜(TEM)等手段,研究了7B04铝合金在施加和不施加直流电条件下,经470℃固溶和100-140℃时效处理后的组织和力学性能。与传统的T6处理(470 oC/30 min+120 oC/24h)相比,固溶和/或时效处理时施加500A的电流,可显著提高GPII区的析出密度,进而提高峰时效状态下的拉伸强度和延伸率。固溶过程中施加直流电可将随后时效合金达到峰值强度的时间明显缩短12h。     

Effects of cross rolling on texture,mechanical properties and anisotropy of pure Mo plates

To clarify the influence of the deformation texture on the mechanical properties, pure Mo plates were processed by various cross rolling procedures, and the relation among texture, microstructure and mechanical properties was discussed. The results show that cross rolling of the Mo plates is beneficial for the formation of the rotated cube component, i.e., {001}〈110〉. The corresponding orientation density exhibits a positive correlation with the total rolling deformation and the current-pass deformation. When the total deformation is 96% or greater, the Mo plates form a texture orientation dominated by {001}〈110〉, whereas the γ-fibre texture becomes weaker and the cube texture {100}〈100〉 disappears completely. The presence of {001}〈110〉 has great effects on the properties of cross-rolled Mo plates, which is beneficial for strength enhancement and plasticity reduction in both the rolling direction (RD) and the transverse direction (TD).     

Flotation performance and adsorption mechanism of novel 1-(2-hydroxyphenyl)hex-2-en-1-one oxime flotation collector to malachite

A novel collector 1-(2-hydroxyphenyl)hex-2-en-1-one oxime (HPHO) was synthesized from 2-hydroxy acetophenone and butyraldehyde. Its flotation performance and adsorption mechanism to malachite were investigated by flotation test, zeta potential, Fourier transform infrared (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis techniques. Compared with benzohydroxamic acid (BA), 1-(2-hydroxyphenyl)ethan-1-one oxime (HPEO) and sodium isobutyl xanthate (SIBX), HPHO exhibited excellent collecting power to malachite without additional reagents, such as Na₂S regulator and methyl isobutyl carbinol (MIBC) frother. Results of zeta potential indicated that HPHO was coated on malachite surfaces through a chemisorption process. FTIR and XPS data gave clear evidence for the formation of Cu–oxime complex on malachite surfaces after HPHO adsorption through the linkage between C=C, –OH, N–OH group and Cu species.     

Fe–N–Si tri-doped carbon nanofibers for efficient oxygen reduction reaction in alkaline and acidic media

The most ideal substitute for Pt/C to catalyze the oxygen reduction reaction (ORR) is the transition metal and nitrogen co-doped carbon-based material (TM-N-C). However, large particles with low catalytic activity are formed easily for the transition metals during high-temperature carbonization. Herein, PAN nanofibers uniformly distributed with FeCl₃ were coated with SiO₂ and then carbonized to obtain Fe–N–Si tri-doped carbon nanofibers catalyst (Fe–N–Si-CNFs). The SiO₂ can further anchor the Fe atoms, thus preventing agglomeration during the carbonization process. Meanwhile, Si atoms have been doped in CNFs during this process, which is conducive to the further improvement of catalytic performance. The Fe–N–Si-CNFs catalyst has a 3D network structure and a large specific surface area (809.3 m² g⁻¹), which contributes to catalyzing the ORR. In alkaline media, Fe–N–Si-CNFs exhibits superior catalytic performance (E_1/2 = 0.86 V vs. RHE) and higher stability (9.6% activity attenuation after 20000s) than Pt/C catalyst (20 wt%).     

A two-stage vision-based method for measuring the key parameters of ball screws

Ball screws are crucial for improving the reliability and interchangeability of transmission mechanical systems; however, existing contact measurement methods that utilise stylus contact are not efficient, which precludes their use for rapid in-situ geometry evaluation. This paper presents a vision-based two-stage method for rapid measurement of key parameters (raceway arc radii and centre distance) of ball screws. The edge contour information is extracted from the acquired image using the dual-tree complex wavelet transform and non-maximal suppression. In the matching stage, a shape-matching algorithm is used for detecting approximate geometrical centres of raceway arcs. The refinement stage, on the other hand, is implemented for acquiring precise dimensional results. Furthermore, the method of averaging multiple measurements is performed to suppress random noise. A comparative experiment is presented to validate the robustness of the proposed method. Based on experimental results, the calculated mean absolute errors in the measurement of the two raceway arc radii and the centre distance are found to be 0.0082 mm, 0.0079 mm and 0.0055 mm, respectively. This study therefore paves the way for key parameter measurement without removing ball screws.